HexaNode® Fully Addressable LPG Leak Detection Panel HXFA-255 & SSLGD255CP & SLLGD255CP

The addressable control panel, HXFA-255 / SLLGD255CP will gives the easy addressing facility through the ModBus RTU protocol up to 255 Intelligent addressable monitor modules (AMM) which connected to LPG detectors. It is a microprocessor-based transmitter designed for use with AMM modules armed with LPG gas detectors. All SLLGD255CP electronics are contained within the dust proof (IP65) housing so that installation can be processed at the sensor site or any dust environment. The panel uses 13 no’s of function Mod bus protocol via RTU bus output to interface to the AMM modules. SLLGD255CP Hexa:Node® will transmit the data using Modbus RTU protocol.

Specifications

• Power : 88 to 132V AC (110V AC Selected) or 176 to 264V AC (230V AC Selected) 47 to 63Hz / 150 Watts /  DC Option Available
• Display :  7″ full Colour Display
• Operating Temperature : 0 °C to 55 °C
• Operating Humidity : Up to 95% non – condensing
• Resolution :  0.00% or ppm Range Dependent
• Update Rate : 1 Second
• Size (mm) :  255 (H) x 265 x (W) x 100 (D)
• Protection Standard : IP 54
• Inputs : Up to 4 or up to 8 x 4-20mA loops
• Inputs :  8 analogue 4-20mA loops
• 2 x RS485 data highways for up to 255 SLLGD88AM
• Outputs (Standard) : 3 x configurable SPCO relays (7 Amp non conductive load)
• 1 x fault SPCO relays (7 Amp non conductive load)
• 1 x solid state audio/sounder 24VDC
• 1 x solid state Visual/flasher 24VDC
• Outputs (Optional) : Additional 8 way relay cards, I/O Nodes
• Gas Detectors
• Check ratings for maximum I/O from PSU
• Optional Equipment : Battery backup 1.2Ah or 2.4Ah
• CE Declaration : BS EN 61000-6-4 EMC Compatibility ‘Emissions’
• BS EN 61000-6-2:2001 EMC Compatibility ‘Immunity’
• BS EN 61010-1:2001 Safety requirements, electrical equipment
• Weight : 3.65 KG