The addressable control panel, HXFA-255 / SLLGD255CP will gives the easy addressing facility through the ModBus RTU protocol up to 255 Intelligent addressable monitor modules (AMM) which connected to LPG detectors
The HexaNode® Dry Out Relay Module is a reliable control solution for managing LPG solenoids, activated by signals from a Direct-On-Line (DOL) switch or addressable monitoring module. This module allows precise control of gas flow, ensuring safe and efficient operation in LPG systems. Ideal for industrial, commercial, and residential applications, it enables automated activation and deactivation of solenoids, enhancing system safety and performance. Easy to integrate and install, the HexaNode Dry Out Relay Module is a key component for any gas-powered automation system.
The HexaNode® HXDS55 DOL Switch is a high-performance motor control switch with built-in safety features like a 1-hour DeWalt timer, RGB color ring for status indication, and a durable stainless steel IP65 casing. Designed for industrial, commercial, and residential use, this switch ensures precise motor control, enhanced safety, and long-lasting performance across a variety of applications.
The HexaNode® HXNA-NACM-44 4-Channel Dry Out Relay Module is a versatile safety control module designed to integrate with HexaNode® LPG leak detectors, DOL switches, and fire detection systems. This 4-channel module automates safety functions such as gas shutoff, alarm activation, and fire suppression, offering reliable, real-time responses in industrial, commercial, and residential environments.
The HexaNode® HXFA-AMCM-85 AMM Addressable Monitor Module provides advanced LPG leak detection and control features, supporting up to 99 AMM units with Modbus RTU communication. With the ability to connect 8 detectors, solenoid control, dual communication protocols, and a dustproof IP65 housing, it’s ideal for large-scale industrial safety applications and environments prone to gas hazards.
The 5V 12mm Active Mini Buzzer is a compact and efficient audio signaling device designed to produce sound at a minimum of 85 dB from a distance of 10 cm. Operating within a voltage range of 4 to 12 V and drawing a maximum of 32 mA, it is ideal for various electronic projects and alarm systems. With a resonant frequency of 2300 ±300 Hz and a temperature tolerance from -20°C to 45°C, it is both versatile and reliable. Its small size (height: 9.16 mm, diameter: 11.78 mm) and lightweight design (1.6 g) make it suitable for space-constrained applications.
This Basic MP3 USB Kit with Bluetooth & FM is a versatile audio module that supports playback from Bluetooth, FM radio, USB drives, MP3 files, and SD cards. It operates on a 5V supply, with some models supporting up to 12V (ensure correct pin connections). Features include a 7-segment LED display for song numbers, an IR remote control, and the need for an external amplifier to connect speakers. Note that the module’s appearance and remote control may vary slightly from images.
The AD828 Stereo Dynamic Microphone Preamplifier Module provides high-quality, low-noise amplification for dynamic microphones. With a wide voltage range of 3.8V-15V DC, adjustable gain, and stereo input support, this preamp module is perfect for home studios, live sound systems, and DIY audio projects.
The Mini 12mm Momentary ON/OFF Push Button Round Switch PBS-33B is a compact, reliable push button available in Blue, Green, Red, White, and Yellow. Ideal for DIY projects, control panels, and Arduino systems, this switch offers easy installation and long-lasting performance for a variety of applications.
The MAX98357A I2S DAC Class D Mono Amplifier Module is a compact, power-efficient audio solution that supports I2S audio input, making it ideal for DIY audio projects, Bluetooth speakers, and Raspberry Pi applications. With a Class D amplifier and the ability to drive 4-8Ω speakers, this module offers high-quality sound in a small package.
Build your own music system with the TPA3110 XH-A232 Dual Channel Digital Power Amplifier Board, featuring dual 30W stereo output. This efficient Class D amplifier utilizes advanced TPA3110 technology, supports a 12V to 24V power supply, and includes robust protection features. With a high signal-to-noise ratio of 100dB and excellent sound quality, it’s ideal for various audio applications.
The AMS1117-5.0 is a 1A low dropout voltage regulator that provides a stable 5V output for various electronic applications. With low dropout voltage, thermal shutdown protection, and a compact design in SOT223/SOT89 packages, it’s perfect for battery-powered devices, Arduino projects, and sensitive electronics requiring efficient power regulation.
The GT30G124 TO220F 600V 200A IGBT MOSFET is a high-power switching device with low conduction losses, fast switching, and high current handling. Ideal for motor drives, inverters, and power supplies, it ensures efficient power conversion and thermal management in demanding applications.
The IRF5210 TO220 -100V -40A P-Channel MOSFET is a high-power P-Channel MOSFET with a voltage rating of -100V and a current capacity of -40A. It features low on-resistance and fast switching, making it ideal for power supplies, motor control, and high-side switching applications.
The 78M06 SMD TO252/DPAK is a 6V linear voltage regulator offering low dropout voltage, stable output, and high load regulation, ideal for embedded systems, communication devices, and consumer electronics.
The 74150 is a 16-line to 1-line data selector/multiplexer in a DIP-24 package, offering active-low selection and TTL compatibility. Ideal for data bus systems, signal routing, and peripheral device control, this high-speed, low-power IC allows for efficient data multiplexing and selection.
The 74HC14 DIP HEX SCHMITT TRIGGER INVERTER is a high-performance CMOS device featuring six independent inverters with Schmitt-trigger inputs. It offers a wide voltage range and low power consumption, making it perfect for a variety of electronic applications.
The 74LS95 is a 4-bit shift register in a DIP-16 package, offering parallel input, parallel output, and serial input. Ideal for serial-to-parallel conversion, data storage, and digital signal processing, this TTL-compatible IC provides reliable data shifting and transfer in both serial and parallel formats.
The CD4081 DIP Quad 2-Input AND Gate is a CMOS IC containing four independent 2-input AND gates for basic logic operations. Each gate outputs logic high (1) only when both inputs are high (1). With a wide voltage range (3V to 18V), low power consumption, and high noise immunity, it is ideal for digital logic circuits, combinational logic, and control systems. The IC comes in a DIP-14 package, perfect for integration into breadboards and PCBs.
The CD4028 SOP 1-of-10 Decoder is a CMOS-based decoder IC that converts a 4-bit binary input into a 1-of-10 decimal output. Ideal for BCD-to-decimal decoding, seven-segment display driving, and control logic systems, it operates over a wide voltage range (3V to 18V) and features low power consumption and a compact SOP-16 package.
The CD4002 SOP Dual 4-Input NOR Gate is a CMOS IC with two independent 4-input NOR gates, ideal for logic operations, signal processing, and control systems. With low power consumption, high current drive, and wide voltage range, it is a versatile solution for simplifying and optimizing digital circuit designs.
The 74LS51 is a Dual 2-Wide 2-Input AND-OR-INVERT Gate IC in a DIP-14 package, offering flexible logic operations for AND, OR, and INVERT functions. Ideal for digital systems, control circuits, and signal processing, it provides efficient logic functions in a compact form.
The MMBTH10LT1G 3EM SOT23 NPN Transistor is a compact, high-performance transistor with a 25V collector-emitter voltage rating and 100mA collector current rating. It is ideal for low-power switching, signal amplification, and digital circuit applications.
The HEXANODE Fully Assembled Knight Rider Tail Circuit is a pre-assembled LED circuit that creates the iconic “Knight Rider” tail light effect. Perfect for automotive lighting, DIY electronics, and custom displays, it offers a striking sequential lighting pattern for a futuristic look.
The 3.3µF 50V Tantalum Capacitor is a reliable capacitor made from high-quality tantalum, designed for various electronic applications. With a voltage rating of 50V and excellent electrical characteristics, it is ideal for decoupling, filtering, and power management in modern electronic circuits.
The KF103 – 5.0mm 2 PIN Angle Connector is a compact and durable two-pin connector with a 5.0mm pitch. Its angled design makes it ideal for space-constrained applications, ensuring reliable wire connections in automation systems, electronics, and more.
A1011 TO-220 PNP Power Transistor (1.5A,160V,25W) 
HEATSINK TO220 20X14.4X9MM 
22UF 25V 5X5.3mm SMD Electrolytic Capacitor 
MPSA92 TO92 -300V -500mA PNP Transistors 
