The addressable control panel, HXFA-255 / SLLGD255CP will gives the easy addressing facility through the ModBus RTU protocol up to 255 Intelligent addressable monitor modules (AMM) which connected to LPG detectors
The HexaNode® Dry Out Relay Module is a reliable control solution for managing LPG solenoids, activated by signals from a Direct-On-Line (DOL) switch or addressable monitoring module. This module allows precise control of gas flow, ensuring safe and efficient operation in LPG systems. Ideal for industrial, commercial, and residential applications, it enables automated activation and deactivation of solenoids, enhancing system safety and performance. Easy to integrate and install, the HexaNode Dry Out Relay Module is a key component for any gas-powered automation system.
The HexaNode® HXDS55 DOL Switch is a high-performance motor control switch with built-in safety features like a 1-hour DeWalt timer, RGB color ring for status indication, and a durable stainless steel IP65 casing. Designed for industrial, commercial, and residential use, this switch ensures precise motor control, enhanced safety, and long-lasting performance across a variety of applications.
The HexaNode® HXNA-NACM-44 4-Channel Dry Out Relay Module is a versatile safety control module designed to integrate with HexaNode® LPG leak detectors, DOL switches, and fire detection systems. This 4-channel module automates safety functions such as gas shutoff, alarm activation, and fire suppression, offering reliable, real-time responses in industrial, commercial, and residential environments.
The HexaNode® HXFA-AMCM-85 AMM Addressable Monitor Module provides advanced LPG leak detection and control features, supporting up to 99 AMM units with Modbus RTU communication. With the ability to connect 8 detectors, solenoid control, dual communication protocols, and a dustproof IP65 housing, it’s ideal for large-scale industrial safety applications and environments prone to gas hazards.
The 5V 12mm Active Mini Buzzer is a compact and efficient audio signaling device designed to produce sound at a minimum of 85 dB from a distance of 10 cm. Operating within a voltage range of 4 to 12 V and drawing a maximum of 32 mA, it is ideal for various electronic projects and alarm systems. With a resonant frequency of 2300 ±300 Hz and a temperature tolerance from -20°C to 45°C, it is both versatile and reliable. Its small size (height: 9.16 mm, diameter: 11.78 mm) and lightweight design (1.6 g) make it suitable for space-constrained applications.
This Basic MP3 USB Kit with Bluetooth & FM is a versatile audio module that supports playback from Bluetooth, FM radio, USB drives, MP3 files, and SD cards. It operates on a 5V supply, with some models supporting up to 12V (ensure correct pin connections). Features include a 7-segment LED display for song numbers, an IR remote control, and the need for an external amplifier to connect speakers. Note that the module’s appearance and remote control may vary slightly from images.
The AD828 Stereo Dynamic Microphone Preamplifier Module provides high-quality, low-noise amplification for dynamic microphones. With a wide voltage range of 3.8V-15V DC, adjustable gain, and stereo input support, this preamp module is perfect for home studios, live sound systems, and DIY audio projects.
The Mini 12mm Momentary ON/OFF Push Button Round Switch PBS-33B is a compact, reliable push button available in Blue, Green, Red, White, and Yellow. Ideal for DIY projects, control panels, and Arduino systems, this switch offers easy installation and long-lasting performance for a variety of applications.
The MAX98357A I2S DAC Class D Mono Amplifier Module is a compact, power-efficient audio solution that supports I2S audio input, making it ideal for DIY audio projects, Bluetooth speakers, and Raspberry Pi applications. With a Class D amplifier and the ability to drive 4-8Ω speakers, this module offers high-quality sound in a small package.
Build your own music system with the TPA3110 XH-A232 Dual Channel Digital Power Amplifier Board, featuring dual 30W stereo output. This efficient Class D amplifier utilizes advanced TPA3110 technology, supports a 12V to 24V power supply, and includes robust protection features. With a high signal-to-noise ratio of 100dB and excellent sound quality, it’s ideal for various audio applications.
The AMS1117-5.0 is a 1A low dropout voltage regulator that provides a stable 5V output for various electronic applications. With low dropout voltage, thermal shutdown protection, and a compact design in SOT223/SOT89 packages, it’s perfect for battery-powered devices, Arduino projects, and sensitive electronics requiring efficient power regulation.
The 0.8mm 50g Soldering Lead Wire RALL is a high-quality soldering wire perfect for electronics and electrical work. With a 0.8mm diameter and lead composition, it ensures reliable and durable solder joints, ideal for DIY projects, repairs, and professional assembly tasks.
The 74HC132 SOP Quad 2-Input NAND Schmitt Trigger is a high-speed, noise-immune IC that contains four independent NAND gates with Schmitt trigger inputs. Ideal for digital systems, communication circuits, and microcontroller interfaces, it ensures clean and reliable signal transitions in noisy environments.
The Nano V3.0 / Nano Supermini Type-C Development Board with ATMEGA328P and CH340 serial port is a compact, efficient board ideal for DIY electronics, IoT devices, and Arduino-based projects. It features a Type-C USB port for fast and reliable programming.
The PC847 4-channel optoisolator offers reliable signal isolation, ideal for power supplies, motor control systems, and communication circuits, providing 35V/50mA capacity in a compact SOP package.
The A1837 is a high-performance PNP transistor with a -230V voltage rating and 1A current capacity, designed for use in audio amplifiers, power control, and high-voltage switching circuits.
The 10R 20W Ceramic Cement Resistor is a high-power resistor designed to handle up to 20 watts, ideal for use in power supplies, amplifiers, and industrial applications requiring high durability and thermal conductivity.
The Circuit Wire Roll – Black Normal Quality is a 26 AWG copper wire with PVC insulation, ideal for electronics projects, DIY prototyping, and low-voltage connections. The black insulation is perfect for grounding or negative connections, and the wire comes in a convenient spool roll for easy storage and cutting.
The 90N10 is a high-voltage, N-channel power MOSFET designed for efficient power switching applications. It offers a balance of high voltage capability, moderate current handling, and fast switching speed.
The 6VDC 5Pin Relay With 250VAC 10A , 30VDC 10A Contact relay offers reliable switching for various applications, managing up to 10A, ideal for home automation and industrial use.
The MBRF10200CT TO220F 200V 10A Schottky Barrier Rectifier is a high-efficiency power rectifier designed for fast switching and low power dissipation. With a 200V reverse voltage rating and 10A current rating, it is ideal for use in power supplies, inverters, DC-DC converters, and motor drives.
The TIP107 TO220 PNP Darlington Transistor is a 100V, 8A high-performance transistor designed for high-current switching and amplification applications. Its high current gain, low saturation voltage, and efficient thermal management make it ideal for motor drivers, power amplifiers, and high-power switching circuits.
The E13009-2 TO220 400V 12A Power Transistor is a high-power NPN transistor suitable for power amplification, motor control, and switching applications. With a 400V voltage rating and 12A current capacity, it offers low saturation voltage and fast switching for efficient operation.
The MOC3021 is a DIP-6 optoisolator with an integrated triac driver, providing 7,500Vrms isolation for safe and efficient switching of AC and DC loads in industrial control, consumer electronics, and automation systems.
The CD4049 DIP Inverting Buffer features six independent inverting NOT gates and is capable of directly driving 74-series TTL devices. With its low power consumption and CMOS technology, it is perfect for signal inversion, TTL interface, and digital logic circuits. The IC operates over a voltage range of 3V to 18V, offering versatility and efficiency for a range of applications.
STR5A464D / 5A464D DIP Non-Isolated Off-Line PWM Controllers with Integrated Power MOSFET 
433MHz RF Transmitter And Receiver Module With 4 Channel Output 
